Standard

Modernization of crank mechanisms of main drive of cold rolling tube mills. / Chechulin, Yu. B.; Pokrovskij, V. B.
в: Stal', № 1, 1994, стр. 48-49.

Результаты исследований: Вклад в журнал › Статья › Рецензирование

Harvard

Chechulin, YB & Pokrovskij, VB 1994, 'Modernization of crank mechanisms of main drive of cold rolling tube mills', Stal', № 1, стр. 48-49.

APA

Chechulin, Y. B., & Pokrovskij, V. B. (1994). Modernization of crank mechanisms of main drive of cold rolling tube mills. Stal', (1), 48-49.

Vancouver

Chechulin YB, Pokrovskij VB. Modernization of crank mechanisms of main drive of cold rolling tube mills. Stal'. 1994;(1):48-49.

Author

Chechulin, Yu. B. ; Pokrovskij, V. B. / Modernization of crank mechanisms of main drive of cold rolling tube mills. в: Stal'. 1994 ; № 1. стр. 48-49.

BibTeX

@article{bcfaa07a10054b208dbfa23fe631da44,
title = "Modernization of crank mechanisms of main drive of cold rolling tube mills",
abstract = "An updated crank mechanism made as a crankshaft was developed. Its technological stressing as well as its kinetics and statics were analyzed. The safety margin of the stationary axis and of the small-pinion shaft increased by 3.5 and 1.3 times, respectively. At the same time the wear resistance of the bearings remained as before (about a year). The mechanism proposed lowered significantly failure incident of a tube-rolling mill.",
author = "Chechulin, {Yu. B.} and Pokrovskij, {V. B.}",
year = "1994",
language = "Русский",
pages = "48--49",
journal = "Stal'",
issn = "0038-920X",
publisher = "Общество с ограниченной ответственностью {"}Интермет Инжиниринг{"}",
number = "1",

}

RIS

TY - JOUR

T1 - Modernization of crank mechanisms of main drive of cold rolling tube mills

AU - Chechulin, Yu. B.

AU - Pokrovskij, V. B.

PY - 1994

Y1 - 1994

N2 - An updated crank mechanism made as a crankshaft was developed. Its technological stressing as well as its kinetics and statics were analyzed. The safety margin of the stationary axis and of the small-pinion shaft increased by 3.5 and 1.3 times, respectively. At the same time the wear resistance of the bearings remained as before (about a year). The mechanism proposed lowered significantly failure incident of a tube-rolling mill.

AB - An updated crank mechanism made as a crankshaft was developed. Its technological stressing as well as its kinetics and statics were analyzed. The safety margin of the stationary axis and of the small-pinion shaft increased by 3.5 and 1.3 times, respectively. At the same time the wear resistance of the bearings remained as before (about a year). The mechanism proposed lowered significantly failure incident of a tube-rolling mill.

UR - http://www.scopus.com/inward/record.url?partnerID=8YFLogxK&scp=0028195480

M3 - Статья

SP - 48

EP - 49

JO - Stal'

JF - Stal'

SN - 0038-920X

IS - 1

ER -

ID: 52776524