At present, the development of portable devices for the express assessment of the content of biologically active objects, such as antioxidants, is one of the relevant technological problems of modern chemistry, medicine, and engineering. The main advantages of such devices are the simplicity and rapidity of analysis, small volumes of analyte, as well as miniaturization of equipment, making it possible to carry out the on-site analysis and, thus, to take a step towards the personalized medicine. The potentiometric method using the K3[Fe(CN)6]/K4[Fe(CN)6] system, which in the laboratory-scale version proved to be the most accurate, reproducible, and express, was the basis for the developed prototypes of portable devices. In this study, two versions of prototypes of the portable device are proposed, namely, the open microcell with the 0.2 ml volume and the microfluidic device with flow control. The correctness of the antioxidant capacity (AOC) determination in both systems was confirmed by comparing the results of the "introduced-found" method on model solutions of antioxidants and their mixtures with the AOC results obtained in a standard laboratory electrochemical cell. The relative standard deviation did not exceed 10%. The AOC of some beverage industry was determined using the microfluidic device. The correlation coefficient of the results, obtained in the microfluidic device and the laboratory cell, was 0.90, which indicates good data convergence and the possibility of using the potentiometric method implemented in the microfluidic device to assess the AOC of multicomponent objects.