TY - JOUR

T1 - Phase and structural transformations in deformation and heat treatment of 08Kh15N5D2T steel tubing

AU - Zvigintsev, N. V.

AU - Yushkov, Vasiliy I.

AU - Khadyev, M. S.

AU - Konakova, I. P.

PY - 1991

Y1 - 1991

N2 - Annealing in the intercritical area of the α → γ-transformation or hardening from a continuous furnace with subsequent tempering in the α → γ-transformation range included in the production plan for cold-rolled 08Kh15N5D2T tubing do not restore the original workability since the residual austenite is stabilized toward the γ → α-transformation in deformation. Annealing at 650°C does not lead to complete recrystallization and detexturing. To obtain this, it is recommended that rapid electric heating for hardening with subsequent tempering be introduced into the production plan for rolling of tubing.

AB - Annealing in the intercritical area of the α → γ-transformation or hardening from a continuous furnace with subsequent tempering in the α → γ-transformation range included in the production plan for cold-rolled 08Kh15N5D2T tubing do not restore the original workability since the residual austenite is stabilized toward the γ → α-transformation in deformation. Annealing at 650°C does not lead to complete recrystallization and detexturing. To obtain this, it is recommended that rapid electric heating for hardening with subsequent tempering be introduced into the production plan for rolling of tubing.

UR - http://www.scopus.com/inward/record.url?partnerID=8YFLogxK&scp=0025748887

UR - https://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=tsmetrics&SrcApp=tsm_test&DestApp=WOS_CPL&DestLinkType=FullRecord&KeyUT=A1990FD76200021

U2 - 10.1007/BF00700704

DO - 10.1007/BF00700704

M3 - Article

VL - 32

SP - 559

EP - 565

JO - Metal Science and Heat Treatment

JF - Metal Science and Heat Treatment

SN - 0026-0673

IS - 7-8

ER -