Standard

Direct flame impingement heating for rapid thermal materials processing. / Malikov, G. K.; Lobanov, D. L.; Malikov, K. Y. и др.
в: International Journal of Heat and Mass Transfer, Том 44, № 9, 05.2001, стр. 1751-1758.

Результаты исследований: Вклад в журнал › Статья › Рецензирование

Harvard

Malikov, GK, Lobanov, DL, Malikov, KY, Lisienko, V, Viskanta, R & Fedorov, AG 2001, 'Direct flame impingement heating for rapid thermal materials processing', International Journal of Heat and Mass Transfer, Том. 44, № 9, стр. 1751-1758. https://doi.org/10.1016/S0017-9310(00)00204-0

APA

Malikov, G. K., Lobanov, D. L., Malikov, K. Y., Lisienko, V., Viskanta, R., & Fedorov, A. G. (2001). Direct flame impingement heating for rapid thermal materials processing. International Journal of Heat and Mass Transfer, 44(9), 1751-1758. https://doi.org/10.1016/S0017-9310(00)00204-0

Vancouver

Malikov GK, Lobanov DL, Malikov KY, Lisienko V, Viskanta R, Fedorov AG. Direct flame impingement heating for rapid thermal materials processing. International Journal of Heat and Mass Transfer. 2001 май;44(9):1751-1758. doi: 10.1016/S0017-9310(00)00204-0

Author

Malikov, G. K. ; Lobanov, D. L. ; Malikov, K. Y. и др. / Direct flame impingement heating for rapid thermal materials processing. в: International Journal of Heat and Mass Transfer. 2001 ; Том 44, № 9. стр. 1751-1758.

BibTeX

@article{f3ebbf2cc0bd4f088af16dbf0558c1fb,
title = "Direct flame impingement heating for rapid thermal materials processing",
abstract = "Combined experimental and theoretical investigations have been carried out to study heat/mass transfer and combustion in the direct flame impingement (DFI) furnace for rapid heating of metals in materials processing. A large-size industrial DFI furnace, equipped with a multiflame combustion system, has been instrumented for performing detailed fluid dynamics and heat transfer measurements. The mean and local pressure, fuel mass fractions, temperatures and convective/radiative heat fluxes have been measured and are reported for high jet velocities (up to 230 m/s) and firing rates. In the case of natural gas–air firing, the convective heat fluxes as high as 500 kW/m2 were recorded with relatively {\textquoteleft}cold{\textquoteright} refractory wall temperatures (<1400 K). The combustion gas temperature varied between 1500 and 1800 K. A simplified two-dimensional theoretical model was developed to analyze gas flow, flame jet combustion and heat/mass transfer in the DFI furnace. The model developed has been validated against the experimental data and was used to obtain a fundamental understanding of the physical processes taking place in the furnace. In addition, the model has been used as a tool to optimize design and operation of the DFI furnace.",
author = "Malikov, {G. K.} and Lobanov, {D. L.} and Malikov, {K. Y.} and V. Lisienko and R. Viskanta and Fedorov, {A. G.}",
year = "2001",
month = may,
doi = "10.1016/S0017-9310(00)00204-0",
language = "English",
volume = "44",
pages = "1751--1758",
journal = "International Journal of Heat and Mass Transfer",
issn = "0017-9310",
publisher = "Pergamon Press",
number = "9",

}

RIS

TY - JOUR

T1 - Direct flame impingement heating for rapid thermal materials processing

AU - Malikov, G. K.

AU - Lobanov, D. L.

AU - Malikov, K. Y.

AU - Lisienko, V.

AU - Viskanta, R.

AU - Fedorov, A. G.

PY - 2001/5

Y1 - 2001/5

N2 - Combined experimental and theoretical investigations have been carried out to study heat/mass transfer and combustion in the direct flame impingement (DFI) furnace for rapid heating of metals in materials processing. A large-size industrial DFI furnace, equipped with a multiflame combustion system, has been instrumented for performing detailed fluid dynamics and heat transfer measurements. The mean and local pressure, fuel mass fractions, temperatures and convective/radiative heat fluxes have been measured and are reported for high jet velocities (up to 230 m/s) and firing rates. In the case of natural gas–air firing, the convective heat fluxes as high as 500 kW/m2 were recorded with relatively ‘cold’ refractory wall temperatures (<1400 K). The combustion gas temperature varied between 1500 and 1800 K. A simplified two-dimensional theoretical model was developed to analyze gas flow, flame jet combustion and heat/mass transfer in the DFI furnace. The model developed has been validated against the experimental data and was used to obtain a fundamental understanding of the physical processes taking place in the furnace. In addition, the model has been used as a tool to optimize design and operation of the DFI furnace.

AB - Combined experimental and theoretical investigations have been carried out to study heat/mass transfer and combustion in the direct flame impingement (DFI) furnace for rapid heating of metals in materials processing. A large-size industrial DFI furnace, equipped with a multiflame combustion system, has been instrumented for performing detailed fluid dynamics and heat transfer measurements. The mean and local pressure, fuel mass fractions, temperatures and convective/radiative heat fluxes have been measured and are reported for high jet velocities (up to 230 m/s) and firing rates. In the case of natural gas–air firing, the convective heat fluxes as high as 500 kW/m2 were recorded with relatively ‘cold’ refractory wall temperatures (<1400 K). The combustion gas temperature varied between 1500 and 1800 K. A simplified two-dimensional theoretical model was developed to analyze gas flow, flame jet combustion and heat/mass transfer in the DFI furnace. The model developed has been validated against the experimental data and was used to obtain a fundamental understanding of the physical processes taking place in the furnace. In addition, the model has been used as a tool to optimize design and operation of the DFI furnace.

UR - https://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=tsmetrics&SrcApp=tsm_test&DestApp=WOS_CPL&DestLinkType=FullRecord&KeyUT=000167694600011

UR - http://www.scopus.com/inward/record.url?partnerID=8YFLogxK&scp=0035916807

U2 - 10.1016/S0017-9310(00)00204-0

DO - 10.1016/S0017-9310(00)00204-0

M3 - Article

VL - 44

SP - 1751

EP - 1758

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

SN - 0017-9310

IS - 9

ER -

ID: 44109962