Результаты исследований: Вклад в журнал › Статья › Рецензирование
Результаты исследований: Вклад в журнал › Статья › Рецензирование
}
TY - JOUR
T1 - A close look for the γ-ray attenuation capacity and equivalent dose rate form composites based epoxy resin: An experimental study
AU - Mahmoud, K. A.
AU - Tashlykov, O. L.
AU - Samburov, Anatoliy
AU - Zakharova, Polina
AU - Abu El-Soad, A. M.
PY - 2023
Y1 - 2023
N2 - The present work aims to develop new epoxy-based composites with halloysite, basalt, PbO, CuO, and Bi2O3 fillers. The role of the utilized fillers in the structural properties of the fabricated composites was studied using the Fourier transform infrared spectrometer and scanning electron microscope. Additionally, the role of utilized fillers in reducing the equivalent dose rates from Co-60 and Cs-137 isotopes were experimentally examined where the equivalent dose rate values ranged between 1.95 μSv/h–1.36 μSv/h (for E@PbO), 1.88 μSv/h–1.31 μSv/h (for E@Bi2O3 composite), 1.97 μSv/h–1.43 μSv/h (for E@CuO composite), 1.96 μSv/h–1.46 μSv/h (for E@Halloysite composite), and between 1.94 μSv/h–1.47 μSv/h (for E@ Basalt composite), raising the composites’ thickness between 1.0 and 4.65 cm, at gamma-ray energy of 0.662 MeV. Based on the examined equivalent dose rate, the shielding parameters of the fabricated composites were evaluated where the radiation protection efficiency f reaches 36.4%, 33.2%, 31.8%, 38.8%, and 31.3% for epoxy resin reinforced by 25 wt% of PbO, CuO, halloysite, Bi2O3, and basalt, respectively, at gamma-ray energy of 0.662 MeV. The observed outcomes demonstrated that the radiation shielding parameters of low-cost epoxy resin with natural fillers (halloysite and basalt) are marginally inferior to those of CuO, PbO, and Bi2O3 fillers. These results support the feasibility of creating shielding polymer composites using natural fillers rather than expensive and hazardous heavy-weight fillers. © 2023 Elsevier LtdThe present work aims to develop new epoxy-based composites with halloysite, basalt, PbO, CuO, and Bi2O3 fillers. The role of the utilized fillers in the structural properties of the fabricated composites was studied using the Fourier transform infrared spectrometer and scanning electron microscope. Additionally, the role of utilized fillers in reducing the equivalent dose rates from Co-60 and Cs-137 isotopes were experimentally examined where the equivalent dose rate values ranged between 1.95 μSv/h–1.36 μSv/h (for E@PbO), 1.88 μSv/h–1.31 μSv/h (for E@Bi2O3 composite), 1.97 μSv/h–1.43 μSv/h (for E@CuO composite), 1.96 μSv/h–1.46 μSv/h (for E@Halloysite composite), and between 1.94 μSv/h–1.47 μSv/h (for E@ Basalt composite), raising the composites’ thickness between 1.0 and 4.65 cm, at gamma-ray energy of 0.662 MeV. Based on the examined equivalent dose rate, the shielding parameters of the fabricated composites were evaluated where the radiation protection efficiency f reaches 36.4%, 33.2%, 31.8%, 38.8%, and 31.3% for epoxy resin reinforced by 25 wt% of PbO, CuO, halloysite, Bi2O3, and basalt, respectively, at gamma-ray energy of 0.662 MeV. The observed outcomes demonstrated that the radiation shielding parameters of low-cost epoxy resin with natural fillers (halloysite and basalt) are marginally inferior to those of CuO, PbO, and Bi2O3 fillers. These results support the feasibility of creating shielding polymer composites using natural fillers rather than expensive and hazardous heavy-weight fillers. © 2023 Elsevier Ltd
AB - The present work aims to develop new epoxy-based composites with halloysite, basalt, PbO, CuO, and Bi2O3 fillers. The role of the utilized fillers in the structural properties of the fabricated composites was studied using the Fourier transform infrared spectrometer and scanning electron microscope. Additionally, the role of utilized fillers in reducing the equivalent dose rates from Co-60 and Cs-137 isotopes were experimentally examined where the equivalent dose rate values ranged between 1.95 μSv/h–1.36 μSv/h (for E@PbO), 1.88 μSv/h–1.31 μSv/h (for E@Bi2O3 composite), 1.97 μSv/h–1.43 μSv/h (for E@CuO composite), 1.96 μSv/h–1.46 μSv/h (for E@Halloysite composite), and between 1.94 μSv/h–1.47 μSv/h (for E@ Basalt composite), raising the composites’ thickness between 1.0 and 4.65 cm, at gamma-ray energy of 0.662 MeV. Based on the examined equivalent dose rate, the shielding parameters of the fabricated composites were evaluated where the radiation protection efficiency f reaches 36.4%, 33.2%, 31.8%, 38.8%, and 31.3% for epoxy resin reinforced by 25 wt% of PbO, CuO, halloysite, Bi2O3, and basalt, respectively, at gamma-ray energy of 0.662 MeV. The observed outcomes demonstrated that the radiation shielding parameters of low-cost epoxy resin with natural fillers (halloysite and basalt) are marginally inferior to those of CuO, PbO, and Bi2O3 fillers. These results support the feasibility of creating shielding polymer composites using natural fillers rather than expensive and hazardous heavy-weight fillers. © 2023 Elsevier LtdThe present work aims to develop new epoxy-based composites with halloysite, basalt, PbO, CuO, and Bi2O3 fillers. The role of the utilized fillers in the structural properties of the fabricated composites was studied using the Fourier transform infrared spectrometer and scanning electron microscope. Additionally, the role of utilized fillers in reducing the equivalent dose rates from Co-60 and Cs-137 isotopes were experimentally examined where the equivalent dose rate values ranged between 1.95 μSv/h–1.36 μSv/h (for E@PbO), 1.88 μSv/h–1.31 μSv/h (for E@Bi2O3 composite), 1.97 μSv/h–1.43 μSv/h (for E@CuO composite), 1.96 μSv/h–1.46 μSv/h (for E@Halloysite composite), and between 1.94 μSv/h–1.47 μSv/h (for E@ Basalt composite), raising the composites’ thickness between 1.0 and 4.65 cm, at gamma-ray energy of 0.662 MeV. Based on the examined equivalent dose rate, the shielding parameters of the fabricated composites were evaluated where the radiation protection efficiency f reaches 36.4%, 33.2%, 31.8%, 38.8%, and 31.3% for epoxy resin reinforced by 25 wt% of PbO, CuO, halloysite, Bi2O3, and basalt, respectively, at gamma-ray energy of 0.662 MeV. The observed outcomes demonstrated that the radiation shielding parameters of low-cost epoxy resin with natural fillers (halloysite and basalt) are marginally inferior to those of CuO, PbO, and Bi2O3 fillers. These results support the feasibility of creating shielding polymer composites using natural fillers rather than expensive and hazardous heavy-weight fillers. © 2023 Elsevier Ltd
UR - http://www.scopus.com/inward/record.url?partnerID=8YFLogxK&scp=85161640266
UR - https://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=tsmetrics&SrcApp=tsm_test&DestApp=WOS_CPL&DestLinkType=FullRecord&KeyUT=001027600300001
U2 - 10.1016/j.radphyschem.2023.111063
DO - 10.1016/j.radphyschem.2023.111063
M3 - Article
VL - 212
JO - Radiation Physics and Chemistry
JF - Radiation Physics and Chemistry
SN - 0969-806X
M1 - 111063
ER -
ID: 40602925