Standard

Development of a technology for producing molds on gypsum binder. / Kashcheev, I. D.; Baryshnikov, G. P.
In: Refractories, Vol. 36, No. 6, 1995, p. 179-183.

Research output: Contribution to journal › Article › peer-review

Harvard

Kashcheev, ID & Baryshnikov, GP 1995, 'Development of a technology for producing molds on gypsum binder', Refractories, vol. 36, no. 6, pp. 179-183. https://doi.org/10.1007/BF02238656

APA

Kashcheev, I. D., & Baryshnikov, G. P. (1995). Development of a technology for producing molds on gypsum binder. Refractories, 36(6), 179-183. https://doi.org/10.1007/BF02238656

Vancouver

Kashcheev ID, Baryshnikov GP. Development of a technology for producing molds on gypsum binder. Refractories. 1995;36(6):179-183. doi: 10.1007/BF02238656

Author

Kashcheev, I. D. ; Baryshnikov, G. P. / Development of a technology for producing molds on gypsum binder. In: Refractories. 1995 ; Vol. 36, No. 6. pp. 179-183.

BibTeX

@article{1c425fc0bc554f66819b67c83d3d7e61,
title = "Development of a technology for producing molds on gypsum binder",
abstract = "A technology for producing forming mixtures for casting molds based on various refractory fillers and a gypsum binder is developed. An optimum composition is suggested that includes 35% powdered KP-3 quartz calcined at 900°C, 35% fly ash, and 30% gypsum plus additions regulating the casting properties of the forming mixtures. The introduction of the developed composition and the technological process for the production of molds made it possible to decrease the thickness of aluminum-base castings by a factor of 2-3, the mass of cast parts by 30-50%, and the labor intensity by a factor of 2-3. {\textcopyright} 1996 Plenum Publishing Corporation.",
author = "Kashcheev, {I. D.} and Baryshnikov, {G. P.}",
year = "1995",
doi = "10.1007/BF02238656",
language = "English",
volume = "36",
pages = "179--183",
journal = "Refractories",
issn = "0034-3102",
publisher = "Springer Nature",
number = "6",

}

RIS

TY - JOUR

T1 - Development of a technology for producing molds on gypsum binder

AU - Kashcheev, I. D.

AU - Baryshnikov, G. P.

PY - 1995

Y1 - 1995

N2 - A technology for producing forming mixtures for casting molds based on various refractory fillers and a gypsum binder is developed. An optimum composition is suggested that includes 35% powdered KP-3 quartz calcined at 900°C, 35% fly ash, and 30% gypsum plus additions regulating the casting properties of the forming mixtures. The introduction of the developed composition and the technological process for the production of molds made it possible to decrease the thickness of aluminum-base castings by a factor of 2-3, the mass of cast parts by 30-50%, and the labor intensity by a factor of 2-3. © 1996 Plenum Publishing Corporation.

AB - A technology for producing forming mixtures for casting molds based on various refractory fillers and a gypsum binder is developed. An optimum composition is suggested that includes 35% powdered KP-3 quartz calcined at 900°C, 35% fly ash, and 30% gypsum plus additions regulating the casting properties of the forming mixtures. The introduction of the developed composition and the technological process for the production of molds made it possible to decrease the thickness of aluminum-base castings by a factor of 2-3, the mass of cast parts by 30-50%, and the labor intensity by a factor of 2-3. © 1996 Plenum Publishing Corporation.

UR - http://www.scopus.com/inward/record.url?partnerID=8YFLogxK&scp=34249755392

U2 - 10.1007/BF02238656

DO - 10.1007/BF02238656

M3 - Article

VL - 36

SP - 179

EP - 183

JO - Refractories

JF - Refractories

SN - 0034-3102

IS - 6

ER -

ID: 52740051